2.5 Ton Vertical Geothermal Heat Pump EER 26.0
Original price was: $3,649.00.$3,449.00Current price is: $3,449.00.
Unit Model HPX031VSS
2.5 Ton Vertical Geothermal Heat Pump EER 26.0
AHRI# 4547870
- Description
- FEATURE INFORMATION
- UNIT PERFORMANCE
- BLOWERS
- CONDENSORS
- COMPRESSOR
- GENERAL
Description
Buy 2.5 Ton vertical geothermal heat pumps with an EER 26.0 from Miami USA
At our online heat pump store in the USA, you can purchase 2.5 Ton Vertical Geothermal Heat Pump with an EER 26.0. There is no question that geothermal products are significantly more reliable and efficient than electric heating pumps. If energy efficiency, dependability, and stability are not concerns for you, all-electric heating pumps are also the best option. Numerous businesses are offering amazing geothermal-based products for heating and cooling needs. Geothermal energy is a renewable resource that has the benefit of being environmentally friendly. By using this resource, you can protect the environment and your finances.
Miami Heating Pump has accepted responsibility for producing energy-efficient, environmentally friendly heating pumps. Miami heat pumps serve the whole of the United States using geothermal energy. People are being helped and inspired to conserve energy while saving money on their electricity bills by our company’s multipurpose products. All over the United States, we have thousands of happy customers. The cooling and heating requirements of commercial and residential buildings can be satisfied by the 2.5 Ton Vertical Geothermal Heat Pump EER and other geothermal products.
A 2.5-ton Vertical Geothermal Heat Pump: How Does It Work?
Horizontal loops would need an unreasonable amount of land, so vertical systems are frequently used in large commercial structures and educational institutions. Vertical loops are also used when the soil is too shallow for trenching because they disturb the existing landscaping the least. Holes with a diameter of roughly four inches are drilled between 20 and 400 feet deep for a vertical system. Inserting two pipes into the hole, joining them at the bottom with grout to form a loop and increasing performance. The vertical loops also referred to as the manifold, horizontal pipe, trenches, and the building’s heat pump, are connected by the horizontal pipe.
Characteristics of a 2.5 Ton Vertical Geothermal Heat Pump EER 26.0
2.5 Ton Vertical Geothermal Heat Pump with a stainless-steel cabinet and an EER of 26.0.
With a variable speed fan motor, drain pain.
- The HPX031HSS unit model.
- Accredited by AHRI. ARI: 4547870
- Saving energy with the highest energy star rating: 1105381
- A two-stage compressor
- Calm Package.
At Miami Heat Pump, we work with a variety of geothermal products to meet your needs for comfortable heating and cooling.
Benefits of 2.5-ton Vertical Geothermal Heat Pump USA
- Geothermal is low-maintenance and has a long lifespan.
- Long-term financial savings from geothermal energy.
- Geothermal energy increases the value of your house.
- No noticeable HVAC systems outside of your home
- Geothermal energy is both environmentally responsible and renewable.
- Nearly all geographical areas, climates, and weather patterns benefit from geothermal energy.
- Almost all homes and businesses can benefit from geothermal energy.
- Geothermal energy offers cozy and secure heating.
- Leaving the grid
- Geothermal incentives are available.
Application of a vertical geothermal heat pump
Since the land area required for horizontal loops would be prohibitive, large commercial buildings and educational institutions frequently use these systems. Vertical loops are also utilized when the soil is too shallow for trenching because they cause the least amount of disruption to the existing landscaping.
Will a geothermal heat pump reduce energy costs?
The design and operation of your heat pump will affect operating costs. The system you replace will also have an impact on how much money you save on energy costs. The annual savings of installing a typical ground source heat pump in a typical four-bedroom home, including any advised radiator upgrades.
What is the price of a 2.5-ton vertical geothermal heat pump?
The price of installing a 2.5 Ton Vertical Geothermal Heat Pump varies and is affected by:
- The ability to access the ground and whether to install the vertical geothermal heat pump in a borehole or trench.
- The heat pump’s size, model, and brand.
- The size of the building and the amount of heat it requires.
- Whether the building is a new or existing one.
- Whether you choose to install new radiators or underfloor heating or decide to upgrade your existing radiators to increase the heat pump’s efficiency.
Residential Vertical Geothermal Heat Pump
Depending on the fuel being compared, geothermal heating and cooling systems save between 50 and 60% on heating and cooling costs by extracting heat energy and transferring it into buildings.
Geothermal cooling works similarly to conventional air conditioning during the summer, with the exception that heat is instead stored deep in the earth for later use. The result is guilt-free air conditioning because the heat extracted during the summer warms the earth’s core, increasing the ground source heat pump’s efficiency during the winter.
The federal tax credit of 30% from Geothermal Heat Pump
The 30% federal tax credit, also called the Clean Energy Tax Credit or simply the Tax Credit is the biggest incentive offered to anyone installing a geothermal heat pump.
The equipment and labor costs are both covered by the 30% credit because it applies to the entire installation cost. If any portion of the credit exceeds your taxable income for the year, you can claim the remaining portion of the credit when you file your taxes for the following year. Contact us today!
FEATURE INFORMATION
FEATURE INFORMATION | ||||
---|---|---|---|---|
CABINET- | Stainless Steel, Insulated Evaporator Section, Access Panels | |||
DRAIN PAN- | Stainless Steel, Insulated | |||
SAFETY- | High/Low Press, Switches, Condensate Over Flow Switch, Overload Protection, AntiShort Cycle Relays, Lock Out Relays | |||
BLOWERS- | Centifugal Galvanized Wheel, X13 ECM Motor | |||
REF CIRCUITS- | Thermal Expension Valve 1 Circuit | |||
COND COIL- | Coaxial Cupronickel Heat Exchanger | |||
EVAP COIL- | Copper Tubes, Alumininium Fins | |||
REFRIGERANT- | R-410A |
UNIT PERFORMANCE
UNIT PERFORMANCE | ||||||
---|---|---|---|---|---|---|
EVAP COOLING CAPACITY – BTU/HR | WLHP 31,000 | GWHP 39,000 | GLHP 31,800 | |||
HEATING CAP. – BTUIHR (HEAT PUMP MODE) | WLHP 36,000 | GWKP 27,000 | GLHP 20,000 | |||
FACE VELOCITY – FPM | 277 | |||||
COIL ENTERING AIR TEMP. DB/WB- F | 80.6/66.2 |
BLOWERS
BLOWERS | ||||||
---|---|---|---|---|---|---|
AIR VOLUME – CFM | 1000 | |||||
ESP-INH2O | 0.65 | |||||
BLOWER SIZE & QTY | 10”x7” / 1 | |||||
FAN MOTOR-HP&QTY | 1/3 / 1 | FLA(EA)= 2.8A |
CONDENSORS
CONDENSORS | ||||||
---|---|---|---|---|---|---|
WATER FLOW – GPM | 7.5 | |||||
ENTERING WATER TEMP. °F | WLHP 86.0 | GWHP 59.0 | GLHP 77 | |||
WATER PRESS. DROP – FT H2O | 17.1 |
COMPRESSOR
COMPRESSOR | ||||||
---|---|---|---|---|---|---|
NO. OF CIRCUIT CAPACITY STEPS | 1/1 | |||||
TYPE & OTY | Scroll/1 | RLA(EA)= 14.7 A | LRA(EA)=72.5 |
GENERAL
GENERAL | ||||||
---|---|---|---|---|---|---|
VOLTAGE RATING I PHASE / HERTZ | 230/1/60 | |||||
E.E.R. | WLHP 16.0 | GWHP 26.0 | GLHP 17.6 | |||
C.O.P (HEAT-PUMP ONLY) | WLHP 4.8 | GWHP 4.1 | GLHP 3.6 | |||
MIN AMP. / MAX FUSE – AMPS. | 24/35 | |||||
DIMENSION W” X L X H” | 21.5” X 21.5” X 39” | |||||
WEIGHT – NET – LBS. | 210 | |||||
WATER CONNECTION SIZE | 3/4 | |||||
DRAIN CONNECTION SIZE | 3/4 |