WARRANTY:- 10 YEARS ALL PARTS
Unit Model HPHWW024
2.0 ton water to water Geothermal HP (HPHWW024)
2.0 Ton Water to Water Geothermal Heat Pump
Purchase the 2.0 and 2 Water-to-Water Heat Pumps with Stainless Steel Cabinets and Drain Pipe. Miami Heat Pump has been producing and designing high-quality, long-lasting, and effective horizontal geothermal heat pumps for over ten years. The best horizontal geothermal heat pumps are created using specialized technologies by the most qualified, skilled, and experienced engineers. All components for the Water- to -Water Heat Pump are carefully chosen and installed.
We can also guarantee that we offer the best design and the most robust tonnage of horizontal geothermal heat pumps, which will function properly and efficiently whether they are installed in sweltering heat or extremely chilly temperatures. Tons are used to measure geothermal water-to-water heat pumps. Your needs can be met by our most effective and efficient geothermal water-to-water heat pumps.
How does 2.0 Ton Water to Water Heat Pump USA works?
The size of the installation is decided by a professional installer based on the size of the property to be heated and the volume of the water source itself. The system will be installed into a specific water source.
The heating process is facilitated by a network of underground pipes that are submerged. Heat energy can be effectively transferred to the heat pump itself by using either antifreeze liquid in closed-loop systems or water from the source itself in open-loop systems. The overall procedure is essentially the same as other heat pump techniques once the heat energy has been introduced into the system.
Main Features of 2.0 Ton Water to Water Heat Pump
- Made in the USA Energy Star
- Highest energy efficiency ratings in its class Stainless Steel Cabinet High-Efficiency ECM fan Motor High-Efficiency Scroll Compressor
- For units, geothermal tax credits of up to 30% are available.
- Operation in Silence
- Compact Cupro-Nickel Coil Smaller Cabinet
- Includes diagnostic center for quick troubleshooting
- Safety Condensate overflow switch, high and low-pressure switches,
- Additional dehumidification feature (only compatible with humidistat control thermostat)
- Protection Against Intelligent Auto Rest Freeze
- 10-year warranty on the compressor and parts for the insulated heat exchanger.
How long does take a Miami geothermal heat pump to warm water?
A coefficient known as the coefficient of performance is used to gauge the effectiveness of heat pumps. Let’s check the heat pump’s water heating time.
A heat pump typically needs 48 to 72 hours to reach a pool’s desired temperature of 20 degrees Fahrenheit. The temperature of the working fluid, the flow rate of the fluid, and many other variables affect the heating time.
Geothermal heat pumps: how much water do they use?
Water is used by heat pumps to capture heat from the refrigerant. Let’s talk about the amount of water that heat pumps use.
For each tonne of heating capacity, heat pumps use close to two to three gallons of source water per minute.
Why use water in a 2.0 Ton water to water geothermal heat pump in the USA?
A higher-temperature reservoir receives heat from a cold reservoir thanks to heat pumps. Let’s talk about the reasons why heat pumps use water.
Heat is extracted from the hot compressed gas of the compressor using water in water heat pumps. Cool water is used to remove the heat. As a result, the water leaves the system at a higher temperature and the refrigerant leaves as a liquid under low pressure.
Why Use Miami 2.0 Ton Water to Water heat pump?
Although they have a number of advantages, water-to-water heat pumps also have some disadvantages. For instance, not all locations have enough groundwater, and this must be painstakingly researched beforehand by experts.
For the required drilling work and to install the water source heat pump, a formal permit is required. For instance, this kind of heat pump is prohibited in water conservation zones.
Heat pumps can get clogged with deposits when there is a lot of iron and manganese in the groundwater. Both the output and efficiency of the heating are negatively impacted by this.
Due to the costly well drilling work and approval procedure, installing a water-to-water heat pump is complicated. In comparison to air-to-water heat pumps or even gas-condensing boilers, this type of heat pump heating is therefore more expensive.
Water-to-water heat pumps, however, typically pay for themselves very quickly due to their excellent efficiency. You will have a very contemporary, effective, and long-lasting heating system as long as the location is carefully examined to ensure that it is appropriate for this type of heating. for more information, Please contact us today or visit our website .